WTB edelbrock intake and Sanden a/c

[USSCADY]

My old A6 died so figured it was time to switch to an Edelbrock 2115 and a sanden compressor set up and go to R134. Want to buy a clean used intake, trying to save over a new price. Engine is stock 75 500 except for mild cam and springs and reworked oil pump. Thanks, Dave

 

[Cadillac Kid 1]

FWIW I don't think you are going to be happy in the middle of the San Jose summer with R-134a in yourI did the "AC System delete AC system. Typical losses in capacity range about 18-25%. What I did when I went to a 2115 was to use an R-4 compressor and stuck with R-12 and that was adequate for the Southern Texas Summertime unless I got into VERY heavy traffic.
I have the R-4 and the brackets I used with the 2115. This compressor only ran for a month or so before I did the "AC system delete" for weight removal. If you are interested "PM" me.
Greg Surfas

 

[USSCADY]

Thanks for your help on the R4 set up Greg! Still would like to put an Edel intake if someone has one. Looks like CadCo has ported ones for not much more than an unported new one. I also have a set of big valve heads that should get used.... Then I should probably upgrade from my baby Kruzik N2O cam.....