Latest activity
-
DDaveM replied to the thread Anybody ever converted a distributor to a cam position sensor?.This is a picture of a 75-79 fi distributor. In the box are two magnets 180 degrees apart. One high and one low. They were used for...
-
DDaveM replied to the thread Anybody ever converted a distributor to a cam position sensor?.
-
-
Caddylackn replied to the thread 429 Rochester 4jet Question.I am assuming this is a Rochester 4jet and not a Carter. There is a coil spring in the round choke housing on the passenger side that... -
Well, I'm not an attorney and I don't even play one of TV, but since Mr. Doyle's activities involve numerous claims from apparently... -
Howdy folks, I recently picked up a '65 CDV. She runs like a dream, no ticking, no smoke. However, on a cold start, it takes a snort of...
-
-
When I did my 500/nv4500, I used a cadco flywheel. Made my own cad to chev adapter plate. I also did not drill my crank, I used a pilot... -
kzhurley replied to the thread Caddy 500 bolted to a Chevy nv4500.When I did my 500/nv4500, I used a cadco flywheel. Made my own cad to chev adapter plate. I also did not drill my crank, I used a pilot... -
Darius replied to the thread Staying safe.Same here! bro. d
-
This place keeps me from ordering $$$$gun parts:laugh: -
smalltruckbigcid replied to the thread Caddy 500 bolted to a Chevy nv4500.I think caddycarlo had a how to on that many years ago
-
smalltruckbigcid replied to the thread Richard Holdener is gonna boost a Cadillac 500.The valve guide tool was available from Goodson mtg.
-
cadillac512 replied to the thread 3600 stall tq converter.Hi Charles; I do have the converter. Left you a PM. Thanks! Terry -
ccjohn2 replied to the thread 3600 stall tq converter.Hi Terry, was inquiring about the converter. Do you still have it? If you remember I purchased the other converter from you. I'm... -
Caddylackn replied to the thread Richard Holdener is gonna boost a Cadillac 500.Did you notice that Richard said the original heads on Richard's 500 motor from the Gremlin were 425 heads? That Caddy 500 powered...
-
Caddylackn replied to the thread Jay's 66 Miller-Meteor build.I bought one of those same filters but didn't realize the barbed ends were chrome plated plastic or cheap pot metal and are prone to...
