Intakes , intakes and more intakes

Roy Heisenberg

The 472 Crank is stronger due to overlap
Joined
Dec 26, 2018
Messages
212
Reaction score
23
Points
18
Location
Folsom, California
What vehicle(s) do you drive?
472 Caddy in a ‘75 Jeep J-20 TH-400 Dana-60 100LL
I hear you loud and clear. A big dual-plane with 8 fuel injection ports would be very handy for guys that are ready to ditch the 850 double-pumper carb !!
 

jwsunup

New Member
Joined
Jan 3, 2012
Messages
18
Reaction score
4
Points
3
Location
orange texas
What vehicle(s) do you drive?
24 model T roadster p/u with 500/ t350 jag irs
making progress on the turbo setup... IMG_20170327_192502957.jpg IMG_20170327_192502957.jpg
 

Attachments

  • IMG_20170327_192520817.jpg
    IMG_20170327_192520817.jpg
    3.6 MB · Views: 28

Darius

Well-Known Member
Joined
Oct 15, 2004
Messages
4,577
Reaction score
864
Points
113
Now, THAT is interesting!! WOW!

There certainly is a whole lot of metal fab and welding on that little after school project. :notworthy:

Has it been run yet?

bro. "impressed" d
 

5one9

Active Member
Joined
Sep 23, 2018
Messages
770
Reaction score
222
Points
43
Location
WV
What vehicle(s) do you drive?
2007 Magnum SRT8, 1957 F100
Nice setup. I hope you aren’t feeding that monster with the fuel pump pictured?
 

Big Cadoo!

Active Member
Joined
Sep 15, 2021
Messages
112
Reaction score
29
Points
28
What vehicle(s) do you drive?
Allegro
One of the interesting things with the caddy engine is what we have in intake manifolds ... the most common being the edelbrock ..... before that we had modified stock intakes or converted 460 intakes ... then there is bulldog and boogieman and the 1475 intake ...beyond that you have hand made intakes ..... the crazy part is almost all of them are built without any testing leaving it up to the user to make them work or just deal with the problems
I've cut up ford a460 and ford c460 intakes and rewelded the parts to aluminum flanges I made. I set up a set of heads on engine on engine assembly stand. Use 75%helium25% argon gas to get heat at torch without too many amos through welder. I was told after making them it won't work you can't do that. Well It will idle down to 600 rpms and rev to 6500 on 512 mechanical roller cadillac big block. Massive plenum too. 1050 dominator. Push the gas peddle and hold on! No bog just instant go pinned to the seat.
 

Big Cadoo!

Active Member
Joined
Sep 15, 2021
Messages
112
Reaction score
29
Points
28
What vehicle(s) do you drive?
Allegro
I've cut up ford a460 and ford c460 intakes and rewelded the parts to aluminum flanges I made. I set up a set of heads on engine on engine assembly stand. Use 75%helium25% argon gas to get heat at torch without too many amos through welder. I was told after making them it won't work you can't do that. Well It will idle down to 600 rpms and rev to 6500 on 512 mechanical roller cadillac big block. Massive plenum too. 1050 dominator. Push the gas peddle and hold on! No bog just instant go pinned to the seat.
A460 intake fit to Cad500.
 

Attachments

  • 20210916_141412.jpg
    20210916_141412.jpg
    332.2 KB · Views: 13
  • 20210916_141404.jpg
    20210916_141404.jpg
    263.5 KB · Views: 13

Big Cadoo!

Active Member
Joined
Sep 15, 2021
Messages
112
Reaction score
29
Points
28
What vehicle(s) do you drive?
Allegro
A460 intake fit to Cad500.
Here's a tunnel ram intake with two 830 cfm hollers. It went 10:30et@130 mph quarter mile. 3780 lb car.
 

Attachments

  • 20210923_125237.jpg
    20210923_125237.jpg
    305 KB · Views: 9
Top