Caddy 500 85 Monte SS

jarvmaster

New Member
Joined
Jul 10, 2008
Messages
12
Reaction score
1
Points
3
500 Cadillac powered 85 Monte Carlo! The car has a built 9 inch rear end with wilwood disc brakes! The car runs and drives but the body/interior is rough. Very little rust and the frame rails are in great shape.
A lot of parts here if you are doing a g body cad 500 swap or want to finish this car.
The engine is very stock, low compression so it has some torque but it would be better if it was built to older specs, which I have some modified heads for. I would sell them separate if interested.
This is a good deal, just the 9 inch I have almost 2 grand in. I’m in Owatonna, Minnesota south of the twin Cities.
3500 or best offer
 

Attachments

Last edited:

Darius

Well-Known Member
Joined
Oct 15, 2004
Messages
4,386
Reaction score
784
Points
113
More information would be nice.

What year is the engine? What is the ratio on that 9 inch? Is that rear posi? What are the other parts that you have to go with the car, including what heads?

d
 

jarvmaster

New Member
Joined
Jul 10, 2008
Messages
12
Reaction score
1
Points
3
It’s a low compression 74 500. 3.23 ratio on the 9 inch.
I have some cad company 500 heads that have been lightly ported with oversized valves.
I would sell them separate.
Let me know if you have any other questions.
 

jarvmaster

New Member
Joined
Jul 10, 2008
Messages
12
Reaction score
1
Points
3
More information would be nice.

What year is the engine? What is the ratio on that 9 inch? Is that rear posi? What are the other parts that you have to go with the car, including what heads?

d
I will make someone a good deal I really would like to sell it to someone who is into cad 500 stuff. Not some kid off Craigslist who is going to blow it up in a week. Any questions let me know.
 

Caddylackn

Active Member
Joined
Sep 7, 2015
Messages
160
Reaction score
68
Points
28
This is a good buy for somebody, unfortunately too far away for me :(.
I assume this is running a turbo 400 and not the stock 200r4 tranny by your choice of B&M shifter, can you confirm?

Your spare heads are small chamber or large chamber?
 

jarvmaster

New Member
Joined
Jul 10, 2008
Messages
12
Reaction score
1
Points
3
It has a Cadillac turbo 400 tranny that has been
Converted to a short shaft.
The heads are 76cc chris from cad company typed 120 cc on this old receipt.
Here is some pics they have the oversized valves and mild porting.
 

Attachments

jarvmaster

New Member
Joined
Jul 10, 2008
Messages
12
Reaction score
1
Points
3
This is a good buy for somebody, unfortunately too far away for me :(.
I assume this is running a turbo 400 and not the stock 200r4 tranny by your choice of B&M shifter, can you confirm?

Your spare heads are small chamber or large chamber?
The heads have been sitting for 10 years they are off a 500 that spun a rod. So they would need to be cleaned up, probably valve seals too?
 

CK

New Member
Joined
May 28, 2007
Messages
25
Reaction score
0
Points
1
I am interested. I sent you a PM.
 

jarvmaster

New Member
Joined
Jul 10, 2008
Messages
12
Reaction score
1
Points
3
I’m putting the car away as I have to go back to work overseas for a few months. If any one is still interested they can send me a message.
 

jarvmaster

New Member
Joined
Jul 10, 2008
Messages
12
Reaction score
1
Points
3
Update car and heads are sold, don’t know if there is any way to delete the thread. Thanks everyone who inquired about the car.
 

Cadillac Kid 1

Well-Known Member
Joined
Jun 18, 2008
Messages
1,159
Reaction score
238
Points
63
Location
San Antonio Texas
Go back to your original post and edit it. Edit the subject line with sold and do the same in the text in say red.
Greg Surfas
 

jarvmaster

New Member
Joined
Jul 10, 2008
Messages
12
Reaction score
1
Points
3
SOLD. 500 Cadillac powered 85 Monte Carlo! The car has a built 9 inch rear end with wilwood disc brakes! The car runs and drives but the body/interior is rough. Very little rust and the frame rails are in great shape.
A lot of parts here if you are doing a g body cad 500 swap or want to finish this car.
The engine is very stock, low compression so it has some torque but it would be better if it was built to older specs, which I have some modified heads for. I would sell them separate if interested.
This is a good deal, just the 9 inch I have almost 2 grand in. I’m in Owatonna, Minnesota south of the twin Cities.
3500 or best offer[/QUOTE]
500 Cadillac powered 85 Monte Carlo! The car has a built 9 inch rear end with wilwood disc brakes! The car runs and drives but the body/interior is rough. Very little rust and the frame rails are in great shape.
A lot of parts here if you are doing a g body cad 500 swap or want to finish this car.
The engine is very stock, low compression so it has some torque but it would be better if it was built to older specs, which I have some modified heads for. I would sell them separate if interested.
This is a good deal, just the 9 inch I have almost 2 grand in. I’m in Owatonna, Minnesota south of the twin Cities.
3500 or best offer
 

jarvmaster

New Member
Joined
Jul 10, 2008
Messages
12
Reaction score
1
Points
3
Go back to your original post and edit it. Edit the subject line with sold and do the same in the text in say red.
Greg Surfas
Hi Greg, I’m logged in but I don’t see a edit option on my old post. Thanks Mike
 
Top