My 250 heads do not seem to have a threaded port that could be used for a heater hose. If it did, that would be the perfect place to tap off some...
Very well done! Sounds like it makes great power !!!!
Add a set of roller rocker shafts, and prepare to melt tires. ;-)
Roger that and a big 10-4. I found Julius over on the 472/500 Cadillac Facebook site. All good, he is helping me pick out a new cam and other...
[ATTACH] Stay in your lane, BRO !!!
So, with a stronger crank, and less crank flex, the oil problems go away?
Cool video ! That Caddy needs some slicks so it will hook up better?
Ok, so here is the back-story. Snacky likes to do lots of Hot-Yoga, and then she gets hungry. So, she like to have lots of snacks.
Good call on the cam from Howard’s!
They do a great cam, and Parkerizing and all that good stuff. What did you do for valve springs for that...
Oops. Had a typo. Would this tranny work well with a 472 or 500 Big Block Caddy ?
Roy who Dances with 472
Nice picture, Greg !
Do you think ARP Head studs will work on all holes, or should I plan to run the center 3 as Head Bolts?
Thanks for the...
The 4L85e is a good unit, and they are rated for 1200 HP.
Could this work being a 472 or 500?
[ATTACH] Step 1 is complete. My new Vt-61 rockers came in via Fed-Ex. Every Cadillac part in the world should look this good. They even left...
Looks like you can get the pump from Cad-Co.
Hot Toddy may help ?
For any bad cold, get a big bottle of Bushmills, and lots of fresh honey. Then, brew up some earl grey tea.
Well said. Ring seal is the key to power.
Nice. Carrillo Rods are epic. I had a set in a 302 DZ and it revved to 8,400 every lap. Let me go see if Carrillo makes rods for my BBCaddy...
All hail the Mega-Squirt !!!!
Cool looking setup with the Ford rockers. Can a guy still guy these Potter Rocker Setups?